December 8, 2022

How to use Lupin’s Albuterol Sulfate Inhalation Aerosol (COMPLETE VIDEO)

Welcome in this video we will learn to use lupine’s albuterol sulfate inhalation aerosol with a dose indicator this video will walk you through three aspects of using medicine through lubin’s albuterol sulfate inhalation aerosol with dose indicator and these are how to prime the inhaler how to use the inhaler how to clean the inhaler lupin’s albuterol sulfate

Inhalation aerosol package comes with a plastic actuator that sprays the medicine from the canister and a package insert for patients which has the complete information and other important facts about the medicine the components of the inhaler are the canister which holds the medicine a blue plastic actuator that sprays the medicine from the canister dose

Indicator which shows the number of sprays left mouthpiece a protective green color dust cap that covers the mouthpiece of the actuator the dose indicator will count down each time a spray is released during every five to seven sprays the dose indicator will count down by 20 towards the next decreasing number when only 40 sprays of medicine are left the dose

Indicator window will turn red indicating that you need a refill or a new prescription let us now learn how to prime your inhaler your inhaler requires priming before you use it for the first time or if your device has not been used for more than 14 days in a row the first step is to remove the protective dust cap from the mouthpiece hold the inhaler upright and

Away from your face and shake it well push the canister all the way down to release a spray into the air shake well and push the canister all the way down to spray the inhaler like this for the second time as a mandatory step to continue the priming similarly shake well and push the canister all the way down to spray the inhaler like this for the third time to

Finish the priming your inhaler is now ready to use the first step while using the inhaler is to shake the inhaler well before each spray take the cap off the mouthpiece of the actuator hold the inhaler with the mouthpiece down and ensure that the mouthpiece is clean and safe to use the next step is to breathe out through your mouth and push as much air from

Your lungs as you can put the mouthpiece in your mouth and close your lips around it push the top of the canister all the way down while you breathe in deeply and slowly through your mouth right after the spray comes out take the inhaler out of your mouth and close your mouth hold your breath up to 10 seconds or as long as you comfortably can and then breathe

Normally if your doctor has prescribed you to use more sprays wait for one minute then repeat the same steps in sequence as shown shake the inhaler and remove the cap ensure cleanliness of mouthpiece breathe out put the mouthpiece in your mouth and push the top of the canister take out the mouthpiece hold your breath up to 10 seconds and then breathe normally the

Last step is to put the cap back on the mouthpiece and make sure the cap snaps firmly into place it is very important to keep the plastic actuator clean so the medicine will not build up and block the spray if the actuator is clean proper medicine in the form of spray comes out from the canister whereas if the medicine builds up or any dust particles are present

Inside the actuator it will lead to blockage and little or no medicine will come out from the canister let us now learn the procedure to clean the inhaler wash the actuator at least once a week take the canister out of the actuator and place it on a dry table do not let the canister get wet take the cap off the mouthpiece and hold the actuator under the faucet

And run warm water through it for about 30 seconds turn the actuator upside down and run warm water through the mouthpiece for about 30 seconds shake off as much water from the actuator as you can look into the mouthpiece to make sure any medicine buildup has been completely washed away if there is any buildup repeat the washing instructions place the actuator

And the cap at a safe place and let them air dry completely for overnight if you have more than one lupin inhaler wash each inhaler at separate times to prevent putting the wrong canister together when the actuator is dry put the canister in the actuator and make sure it fits gently and firmly shake the inhaler well and spray it twice into the air away from

Your face once done remember to put the cap back on the mouthpiece if in any case you need to use your inhaler before the actuator is completely dry repeat the steps as shown below shake as much water off the actuator as you can put the canister in the actuator and make sure it fits firmly shake the inhaler well spray it twice into the air away from your face

Then take your albuterol sulfate inhalation aerosol dose as prescribed after emergency use without overnight drying remember to clean the inhaler as per the previous instructions with overnight drying be cautious to protect your inhaler from the extreme heat the extreme cold and keep it out of the reach of children for detailed important safety instructions

Please refer to the instructions for use section of the package insert included in the pack we hope this video helps you to understand lupin’s albuterol sulfate inhalation aerosol in detail in case you have any questions unanswered please feel free to reach out to us at our toll-free number 1-800-399-2561 we appreciate you for choosing lupin and thank you for watching

Transcribed from video
How to use Lupin's Albuterol Sulfate Inhalation Aerosol (COMPLETE VIDEO) By Lupin Global